1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

signal chain help?

Discussion in 'Recording' started by mcmilliron, Mar 27, 2005.

  1. mcmilliron

    mcmilliron Guest

    ok.. so I'm attempting to create my own guitar amp out of seperate components and I need help putting everything in the right order.
    The idea is to get the best guitar tone I can possibly get direct to disk. No mics, no cabs and no angry neighbors.

    let me know what you guys think. I want to have pre distortion and post distortion EQ but I'm not sure that the signal path is correct. Let me know what you think.

    here is my signal path:

    Guitar / EQ channel 1(DBX 215) / distortion pedal(Rat II) / Preamp(The Brick) / Delay (Boss DD3) / Reverb (Electro Harmonix Holier Grail) / EQ channel 2(DBX 215) / Cabinet Simulator (ADA Microcab) / soundcard input 1 (Emu 1212m)

    does this make sense?

    Some guy on harmony central setup his DBX 215 EQ like this

    does this make sense?


Share This Page