1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

signal routing help

Discussion in 'Recording' started by orbit, Jun 2, 2006.

  1. orbit

    orbit Guest

    okay i just moved to costa rica and i havent had my daw setup forever now. seems i forgot all the basics.

    i have a mackie cfx16 mixer and a delta 1010 breakout box version, and using using cubase sx. i also have an 8 channel headphone amp that i have mostly for future use when i get more mics and such to record a whole band at a time?

    i cant record my bass how i want over some drum sequencing i made up. the only way i can figure out how to route it correctly. the only way it works is to use the insert off the mackie board straight to one of the 8 inputs on mydelta. the problem is i cant use the effects from my mackie board, nor the EQ from it. if i try to use the main outs into the delta then my sequencing records in to my bass track :( i could have sworn i used to be able to set this up right but i have tried everything i can think of.

Share This Page