1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

Smart Research C2M Mono/Stereo Compressor

Discussion in 'Dual Compressors' started by audiokid, Oct 25, 2011.

  1. audiokid

    audiokid Staff

    5371_full.jpg

    The BSmart Research C2M MonoStereo CompressorB has one set of controls and two audio channels for Stereo use.

    The characteristic sound of this unit arises mostly from the fast response at the onset of compression, which when delayed to occur around the mid range attack settings (after 0.3 to 3 milliseconds) results in a window through which transients can still pass. When used accross a mix, or with any dynamic programme, this has the effect of adding 'punch', as the sidechain 'breathes' around these transients, while still controlling overall levels. CRUSH mode has been developed as an extension of this 'musicality', adding to and accentuating the factors involved in producing the character of the unit. CRUSH may sound surprising to those interested in more gentle applications, being capable of exaggerated compression effects, but in conjunction with the fast limit settings also introduced with this unit, it allows the C2 to be used for a much wider range of applications than the C1.
    h=3Smart Research C2M MonoStereo Compressor's featureshTABLE
    TR
    TD="width: 100%"
    LIST
    *Fast attack and limit settings for protective limiting.
    *Crush mode gives f.e.t 'overcompression' with tailored frequency response, and higher distortion, for 'huge' dynamic effects.
    *External sidechain inputs, (for ducking etc.)
    *Power fail bypass for broadcast or live sound.
    *Ratios 1.5:1, 2:1, 3:1, 4:1, 10:1 and Limit.
    *Attack 0, 0.1, 0.3, 1, 3, 10, and 30 msec.
    *Release 0.1, 0.3, 0.6, 1.2, and 2.4 seconds.
    LIST
    h=3Smart Research C2M MonoStereo Compressor's specificationshBPowerB : 100v-240v AC selectable, 30 watts.
    BNoise floorB : Below -104 dBm (flat 20Hz-20Khz).
    BDistortionB : Below 0.005% (1K+4 THD 20Hz-20Khz).
    BFrq. ResponseB : Within 12dB from 20Hz to 100Khz.
    BDepth in rackB : 258mm.
    BMain input B: Balanced, impedance 1K8 per leg.
    BSidechain ipB : Balanced, impedance 10K per leg.
    BOutputB : Discrete transistor. Above +26dBm into 600 ohm load.
    BThresholdB : Adjustable -20 to +20dBm.
    BMake-up gainB : Adjustable 0 to +20dBm.
    TD
    TR
    TABLE
     

Share This Page