1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

SOS::::leads for Uher REEL TO REEL!?

Discussion in 'Vintage Analog Gear' started by benjaminhm, Mar 22, 2010.

  1. benjaminhm

    benjaminhm Guest

    I have a portable reel to reel by Uher, a 4000 Report - L...but can't seem to find a mic lead with the right input output connections. does anyone know of where i can get one?

    theres a 6 pin input socket which i assume is for the mic...

    cheers
     
  2. TheJackAttack

    TheJackAttack Distinguished Member

    Is it 6 pin or 5 pin? It is probably a DIN connector. Two pins are left i/o, two pins are right i/o, one pin is ground, and if there is a sixth pin it is likely phantom power.

    http://www.vandenhul.com/userfiles/docs/Audio_and_Video_Cable+Connector_Wiring_Diagrams_for_DIY_purposes.pdf

    The%20page%20cannot%20be%20displayed"]http://www.audiocircuit.com/index.php?c=UHE&m=4000%20Report%20L]The page cannot be displayed

    []Uher 4000 Report Monitor - UK Vintage Radio Repair and Restoration Discussion Forum (post #10)
     
  3. benjaminhm

    benjaminhm Guest

    yeah the mic input is 6 pin. there is an output which is five (i found and adapter for this) and then there is a speaker output also which is just 2 thin rectangular holes, one smaller than the other. but it was the mic input thants the main problem. i think cb radio mics are 6 pin. dont know if that would work tho...

    cheers
     
  4. TheJackAttack

    TheJackAttack Distinguished Member

    I'd buy a manual download and then you'd know for sure.
     

Share This Page