1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

Soundcraft FX16ii

Discussion in 'Pro Audio Equipment' started by jerry49, May 8, 2011.

  1. jerry49

    jerry49 Active Member

    Sorry for this stupid question. I'm completely new at this.
    Can anybody tell me how to get the internal effects to go to AUX1?
    TIA.
    Jerry
     
  2. dvdhawk

    dvdhawk Well-Known Member

    Hi welcome to RO,

    I assume you've got the FX turned up on the appropriate channel and the FX Output Master. If you want reverb in the monitors the FX Return (and switch to choose Aux 1 / Aux 2) is in the upper left of the Master Section. There is a separate Effects Return for the amount of FX sent to the Monitors and the amount mixed into the Mains.

    FX16ii.jpg

    If you're not getting any FX at all, you might want to check/clean the footswitch jack.
     
  3. jerry49

    jerry49 Active Member

    Thanks, I got it working.
    Jerry
     

Share This Page