1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

Speaker shielding

Discussion in 'Pro Audio Equipment' started by taxman, Sep 29, 2006.

  1. taxman

    taxman Active Member

    I am recording with a lap top and firewire Glyph hard drive. The drive notes that it is a magnetic device and should be kept away from magnets. On the same desk (7 feet wide) I have a pair of unshielded NS10Ms. Any idea about how far away I should keep the hardrive?
  2. anxious

    anxious Guest

    2+ feet and you should be fine.
  3. RemyRAD

    RemyRAD Guest

    In other words do not place anything on top of or around the speakers, especially any computer CRT monitors or TV sets, your mixer and your hard drives. A fake flower in a vase without water would make a nice touch? But then again so would a few beers??

    Soggy speakers like Jimi Hendrix but then again, he's dead.
    Ms. Remy Ann David
  4. JoeH

    JoeH Well-Known Member

    I don't know the math, but the actual magnetic field around a speaker magnet drops off fairly quickly beyond a foot or so. (Something about the inverse cube root? Distance vs. power? I can't recall the theorem now, but it's out there if you google it...)

    This is why magnetic weapons and comic-book villians really don't pose much of a threat; the actual power needed to create dangerous magnetic fields - strong enough to do REAL damage over any kind of distance - is quite huge. The kind of permanent magnets found in speakers are fine for the job as long as you're right up next to them, but as soon as you move beyond a few inches away, the power/pull quickly drops off.

    You should be fine at a foot or two, remember that the HD is shielded as well, for everyday magnetic interferance thats normally all around us. The most interference I've ever had to deal with were reel to reel tapes put directly against a speaker box (which showed surprisingly LITTLE erasure, actually) and more recently, a center/dialog speaker that caused some interference with my video monitor. We moved it 2 inches further up, and the problem went away.

    Better safe than sorry, of course.

Share This Page