1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

Static noise problem

Discussion in 'Recording' started by wannab, Nov 15, 2004.

  1. wannab

    wannab Guest

    Hello. I just completed a small studio and I'm having a problem with static on all my circuits. The static comes from all my components on all circuits (bass amp, PA, stereo receiver etc). The circuits are coming off from a subpanel that I installed to feed my studio. The static actually goes away after a few minutes. Do I have a ground loop problem here or something else going on?

    Is this even the right area to post this question?

    Thanks!
     
  2. LittleDogAudio

    LittleDogAudio Active Member

    If it's a groung-loop, it wouldn't go away without changing something.

    I suggest that you start with only the power amp and speakers, see if it is present, if not then connect the monitor output of your console (assumming you have one) then take a listen.

    Keep connecting pieces of gear until you find the culprit. It may turn out to be just one rouge piece of gear.

    Chris
     
  3. vinniesrs

    vinniesrs Active Member

    If you find that the static issue is common to ALL your devices, then maybe you have a power related issue. Perhaps a description of how you wired this panel would be useful in solving your headaches.
     

Share This Page