1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

Stereo/mono question - Cubase

Discussion in 'Cubase' started by jcb08j, Dec 28, 2011.

  1. jcb08j

    jcb08j Active Member

    Ok, so I just recorded a bunch of tracks in Cubase on my bass guitar. However, I'm an idiot and had all the tracks as stereo even though bass is a mono instrument. Also, on my M-audio USB fastrack which I'm using to record, I had it set on stereo. When I recorded and played it back the sound would only come out of one earphone and the other one would just play constant white noise/static.

    So I export the sound file and there is a strong static sound coming out along with the music. So I'm wondering do I need to re-record all those tracks with everything mono or is there a way to salvage my recordings into clean sound when I export? Even if it just comes out of one speaker.

    I'm using Cubase 5 on Windows 7 with a usb fasttrack m-audio recorder drive.

    Thanks.
     
  2. djmukilteo

    djmukilteo Well-Known Member

    You can change the track in Cubase to mono.
    Try changing your VST connections input and output tabs under "Devices" to all mono, then change the routing in the track Inspector to use a mono track. You should be able to get rid of or separate the white noise channel from the good bass track that way.
    Another way to salvage it would be to export the track to two "wav" file by using the "split tracks" option which will give you two separate L/R tracks. Then just delete the bad half and import the good half to its own new mono track.
    The real key is to have your "VST connections" I/O tabs setup properly to provide a combination of stereo and mono tracks. It sounds like you have all stereo tracks for inputs.
     
  3. jcb08j

    jcb08j Active Member

    I figured it out. It was because I had my mic input turned all the way up on the recording and no mic in. The fuzz/static was from that. Frustrating that I have to re-record all that stuff but at least I won't do it again. Dumb mistake lol. Thanks for the help though
     
  4. TheJackAttack

    TheJackAttack Distinguished Member

    Thats a good lesson. Always zero out your console or interface. It was always lesson two at my gig. Lesson one was how to wrap cables.

    Sent from my DROIDX using Tapatalk
     

Share This Page