1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

Studio Monitors stopped working. Any advice would be appreciated.

Discussion in 'Monitoring / Headphones' started by booms, Aug 9, 2013.

  1. booms

    booms Member

    https://www.youtube.com/watch?v=PQJ4Gf-ax7w
     
  2. Boswell

    Boswell Moderator Distinguished Member

    Have both the L and R monitors got the same problem? If so, the problem is probably the +ve rail of the power supply, which located in the L monitor along with the power amps. If the sonic problem is only in one monitor, the likely reason is an output drive transistor blown in that channel's amplifier.
     
  3. crossbones

    crossbones Member

    Hi,

    Judging from your video, there is a short in the amp passing DC voltage.
    That is why the speaker is sucking in.
    I had a different brand do the same thing due to cranking them too loud, not that you were cranking them too loud.......
    But that was the culprit
     

Share This Page