Hi everybody.. Will be recording shortly.. plan on having the guitarist in a separate room to his amp (as he'll be singing as well). Will need to run long cable from his guitar to his amp.. to do this effectively I can't run an unbalanced cable too far.. I understand this.. so, is the next step to use a DI box to make a balanced signal? From what I understand, the output of the DI box is then a low level (mic level) balanced signal.. but the amp in the other room is gonna need to be fed a TS line (the DI only allows XLR out). Also, not sure if the signal level change from the DI is then appropriate to feed the amp in the other room. Major holes in my knowledge of signals, etc... Any help is appreciated in explaining this basic but fundamental question.