1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

Suddenly my Mac became very slow when plugging in Mackie Onyx 1220i

Discussion in 'Recording' started by Arnstein, Sep 29, 2010.

  1. Arnstein

    Arnstein Active Member

    I've run my mac with the Mackie Onyx 1220i for the last two days, and it have worked very well. Then I started Logic Pro 9 and it was very slow. After a restart, the whole machine was still slow. I unplugged the mixer and everything was back to normal. What is wrong?
     
  2. TheJackAttack

    TheJackAttack Distinguished Member

    Unplug the Mackie mixer. Wait one minute. Plug it back in and fire up the Mac. If it still bogs down then try a brand new firewire cable. This sounds like a bad connection or a cable that is about to crap out. Remember: do not wrap your firewire or usb cables with tight bends or stretched around corners of equipment. The stranded wire in those cables is very tiny on the order of 24 or 28 gauge. I know they come from the store wrapped tight but it's the repeated bending that breaks the wire.
     
  3. TheJackAttack

    TheJackAttack Distinguished Member

    And if none of that works, it could be a corrupted driver. Then you would merely try reinstalling the iOnyx ASIO but it seems to me it works with Mac's Core Audio?
     

Share This Page