1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

Switching to OTB

Discussion in 'Recording' started by Jbrax, Dec 1, 2007.

  1. Jbrax

    Jbrax Guest

    ok this might be a long post here.. But I want your opinions..

    Im thinking about mixing all otb. track everything to Nuendo.

    send all tracks back to the Ramsa add comps, gates eq and effects then

    two track with stereo comp and eq back into nuendo for final stereo track..

    How ever most of my projects are 15 to 16 tracks.. Therefore I would need
    8 more AD/DA conversions. hence another RME..
    1. How do it connect another RME to the system ?Lightpipe? SPDIF? another card?

    RME multiface Hammerfall is what I am currently using
     
  2. drstudio

    drstudio Active Member

    I think this is the best way to go. This is what I've been doing for years with the exception of the master bus compression and EQ you are suggesting, but to each there own. The only ting you have to be careful of is raising your noise floor by going through an older desk.

    I'm running a Fireface with a Tango 8 channel breakout for 16 i/o. I would just add an additional breakeout via Lightpipe for more outputs.

    Cheers, Hope you enjoy the Ramsa!!
     
  3. Jbrax

    Jbrax Guest

    Thanks dr! Ill check into the break outs, that sound like a great Idea....
     

Share This Page