1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

Sync o pa tience...

Discussion in 'Recording' started by jr, Jun 14, 2002.

  1. jr

    jr Guest

    Alrighty then. I gots me a sonar2 at the end of a chain of machines: BRC--3ADATS--Motu2408II--Sonar
    Sonar refuses to stay locked to the BRC clock when I try to track the 3 adats to the computer. I have tried just recording one tape at a time because of possible ram/HD issue, but still doesnt stay locked. System: 1.82 P4, 7200HD, 512 RDram. Anyone who can help me resolve this issue will get acknowledgement on my current project. Thanks!!! (yes, I am that desperate)
     
  2. themidiroom

    themidiroom Active Member

    Hey jr. I'm making the assumption you're using adat sync from your BRC to drive your PC.
    Have you tried (if it's possible) using the computer as the master and have the adats lock to the computer's time code?
     
  3. Rockhard

    Rockhard Guest

    Alrighty then. I gots me a sonar2 at the end of a chain of machines: BRC--3ADATS--Motu2408II--Sonar
    Sonar refuses to stay locked to the BRC clock when I try to track the 3 adats to the computer. I have tried just recording one tape at a time because of possible ram/HD issue, but still doesnt stay locked. System: 1.82 P4, 7200HD, 512 RDram. Anyone who can help me resolve this issue will get acknowledgement on my current project. Thanks!!! (yes, I am that desperate)

    Ok, Sonar as the master. and sync all the rest to the PC. BRC must feed the 2408 with word clock, I have the same set-up with only Adat now...What is you Midi interface?

    Let me know if this helps... :cool:
     

Share This Page