1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

tambourine and shaker tracking

Discussion in 'Recording' started by DJ FADE, Aug 30, 2006.

  1. DJ FADE

    DJ FADE Guest

    anyone have good techniques for tracking tambourine and shaker? i've experimented but can't find the right sounds. they're subtle ingredients in any song, but can also add a lot.

    mic placement, condenser vs dynamic, different pre's - all info appreciated.
     
  2. drumist69

    drumist69 Active Member

    I've had good results with a large diaphragm condensor mic, although I suppose a small diaprhagm condensor would be fine as well. I use an M-Audio DMP3 preamp mostly, or a Mackie VLZ board. I usually play the instrument about a foot from the mic, and tend to work the mic as I'm playing (I mean move the instrument around the mic, left to right, and closer or more distant...think like vocal mic technique!) I've found the shaker or tambourine is the biggest factor, though. I have a tamborine with nickle jingles that sounds crappy no matter what, and one with brass jingles that always sounds nice. The shaker I use is a 20 ounce Pepsi bottle about 1/3 filled with dry rice. From my experience (which is just intense home recording...I'm no pro!) I've found that the tambourine and shaker both seem to need pretty heavy EQ treatment to get the right sound. For example, on a shaker, I'll cut everything but the highs, and probably boost those a bit. On a tambourine, I've gone so far as to pitch shift it down somewhat to get a darker, richer tone. Here's a link...
    Link removed
    Listen to the song "Tattoo"...it uses both shaker and tambourine, and I was pleased with the way they sounded on this track. Hope this helps! ANDY
     
  3. goldentrack

    goldentrack Guest

    it all depends on the exact shaker and sound your going for, but for a lot of general percussion instruments like those or claves or what not, i like Neumann TLM 103 about a foot away, i use wunder pre's

    Chris
    http://www.goldentrackstudio.com
     
  4. jimbo_baby84

    jimbo_baby84 Guest

    i think the best thing you can do is collect a few different sounding shakers, tambos etc and record a bar or 2 of each, listen to it in the context of the mix and decide on the winner. you may still need eq, but you probably won't need as much.
     
  5. rudedogg

    rudedogg Guest

    hey chris, you're in san diego too? i visited golden tracks a year or so ago and met steve when he first got his wunder pres. those are pretty bad ass.

    anyway, i record tambo and shaker with a 57 about a foot or two away usually. depends on the song. i just don't think you need to overthink some percussion instruments. i have tried recording tambo with condenser mics and they just end up sounding too harsh to my ears. the 57 seems to even them out for me.

    steve
     
  6. took-the-red-pill

    took-the-red-pill Active Member

    I just recorded a tambourine. I think I broke every rule there is and the sound was great. It had that off in the distance kind of feel that went perfectly with where I wanted it in the mix.

    I put a condenser in the middle of my 5 X 8 tile bathroom, with the capsule pointed AWAY from me, toward the back wall. I stood in the doorway and shook the tambourine and BINGO!

    Sometimes the dumb things work

    Cheers
    Keith
     

Share This Page