1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

tap track not working

Discussion in 'Recording' started by Jazzpunk1020, Jan 27, 2008.

  1. Jazzpunk1020

    Jazzpunk1020 Guest

    I recently bought a presonus firepod, I upgraded the software to cubase sx which is an option with the LE.

    when i have the set device as the output speaker on my laptop the click track works, but when i change the device to the presonus i can get audio out of the main cr output and the headphone jack, but the click track does not work.

    Anyone encounter this problem before?

    Thanks
     
  2. Jazzpunk1020

    Jazzpunk1020 Guest

    Anyone? at all? sorry for the inpatients but please help
     
  3. bent

    bent No Bad Vibes! Well-Known Member

    I'm not familiar with Cubase, but I imagine that you probably have to send the click to a dedicated track, or an aux (if there is such a thing in that particular software) and then route that track or aux to the mix bus.
     

Share This Page