1. Welcome to RECORDING ORG! Recording, mixing and mastering REAL MUSICIANS through use of microphones and electronic recording equipment.
  2. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

Studio Tascam 2488 recorder

Discussion in 'Recording' started by Birdman, Jan 31, 2005.

  1. Birdman

    Birdman Guest

    I'm looking for someone familiar with the Tascam 2488 recorder. I am trying to assign the multi-effect to more than 1 input. When doing so, the first assigned multi-effect is muted. The recorder only lets me assign 1 input/channel only. How can I save the multi-effect to use on multiple channels? I am using the guitar effects when trying this. Also, I am having difficulty getting effects for vocals. Any guidance or suggestions will be helpful. Thanks!
     
  2. neile

    neile Guest

    As far as I am aware the multi-effect can only be assigned to one channel at a time. It takes up a lot of the effects processing and so is only available once. The compressor that is available for input is avilable on 4 or 8 channels. The 8 channel option is a less well specified optio as it speads the effects processing power quite thin.

    Cheers

    NeilE
     

Share This Page