1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

Tascam FW1884 Service Manual

Discussion in 'Recording' started by rafaelbenghi, Oct 27, 2005.

  1. rafaelbenghi

    rafaelbenghi Guest

    Hi there,

    I need the Tascam FW1884 Service Manual.

    If somebody gets it, please let me know.

  2. RandomGuest

    RandomGuest Guest

    Feb 10, 2001

    On the left side.
  3. rafaelbenghi

    rafaelbenghi Guest

    Service Manual

    Thank you for your cooperation but I need the SERVICE MANUAL (for technical service), not the User Manual.

  4. gdoubleyou

    gdoubleyou Distinguished Member

    Mar 19, 2003
    Kirkland WA
    Home Page:
    Don't think they will be giving that information out freely.

    Besides all modern devices are surfacemount, probably nothing you can solder by hand anyway.

    I'm an electronic tech, and surfacemount boards are so dense that a regular soldering iron would desolder nearby components.

    At work we have a surfacemount station, it has two video cameras on it for veiwing the work area, otherwise you have to use industrial microscopes.

  5. rafaelbenghi

    rafaelbenghi Guest

    It´s an analogic issue

    You´re right. I would be arruined if the issue with my Tascam was such a digital/board error, but in this case it´s only a few burned up pre-amps.
    I think the issue can be fixed, like another comun analogic mixer, so the technician needs only the Service Manual to access the pre-amps section, that is some hard to hit, regarding the number of boards to desassembling.


Share This Page