Tascam Porta Two cracking/distortion

Discussion in 'Tape Recorders' started by VonSmucker, Aug 19, 2017.

  1. VonSmucker

    VonSmucker Active Member

    Joined:
    Aug 19, 2017
    Location:
    Los Angeles
    Hi,

    I have a Tascam Porta Two.

    It's been in good working order for the last six months but yesterday I noticed during playback that the sound I recorded onto Track 1 plays back with light cracking and distortion. You almost can't hear it if you're not listening closely, but its definitely there, making for a gritty/ugly recording. This happens when I record directly and when I use the bus to bounce two tracks onto track 1 (E.g. the tracks on 2 and 3 sound fine when played back on their respective tracks but when I bounce them onto Track 1 they get the crackle!!) I think the issue must lie in the recording process because music recorded earlier on track 1 doesn't have the crackling.

    Cleaning the tape heads didn't help. Would demagnetizing potentially solve this? (I'd rather not buy a demagnetizer but...) Does this sound like a job for a technician? :-/ Looking for any info I can get...

    Thanks!!!!!
    RD
     
  2. kmetal

    kmetal Kyle P. Gushue Distinguished Member

    Joined:
    Jul 21, 2009
    Location:
    Boston, Massachusetts
    Home Page:
    I'd try using a different tape, and running through the maintainence routine described in the manual which will include de magnitizing. Beyond that I'd have to ask someone more knowledgeable than myself.

    If you haven't de magged, you should anyway reguardless if that is the problem or not. Part of tape is consistently cleaning and de magging and lubing things.
     
  3. Boswell

    Boswell Moderator Distinguished Member

    Joined:
    Apr 19, 2006
    Location:
    UK
    Home Page:
    Could you post a short sample of the problem on track 1? Use the Upload a File button at the bottom of the reply box.
     
    kmetal likes this.
  4. DonnyThompson

    DonnyThompson Distinguished Member

    Joined:
    Nov 25, 2012
    Location:
    Akron/Cleveland, OH
    Home Page:
    If you do end up degaussing, make sure your tapes aren't in close proximity while you're doing it. ;)
    It could be any number of issues, a faulty cable, a bad tape, a fader or pot that might need cleaning ...
    As Bos mentioned, posting a sample would help.
    -d.
     
    kmetal likes this.
  5. VonSmucker

    VonSmucker Active Member

    Joined:
    Aug 19, 2017
    Location:
    Los Angeles
    Hey I'm traveling at the moment but will post a sample when I'm back home. Thx yall! :)
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice