1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

Top I/O Interfaces?

Discussion in 'Converters / Interfaces' started by obe1ben, Sep 26, 2006.

  1. obe1ben

    obe1ben Guest

    Just quickly wondering what your top picks for I/O Interfaces are?
    Thanks
     
  2. JamesG

    JamesG Guest

    for mac/pc?
    what DAW?
     
  3. obe1ben

    obe1ben Guest

    Mac. Pro Tools. I know of Digidesigns HD but its a little too pricy.
     
  4. JamesG

    JamesG Guest

    well if your using protools you can only use digi hardware so, all you have to use is the 002, mbox pro, mbox2, and legacy stuff which is all outdated... your best bet is the 002

    P.S you could do protools m-powered but IMHO the m-audio stuff is worse
     
  5. 5amGuy

    5amGuy Guest

    Apogee makes high quality interfaces for ProTools that meet or exceed the quality of the 192 I/O. The would include the Rosetta 200 or 800, and the AD-16x and DA-16x - http://www.apogeedigital.com

    These interfaces can be run with the option of using firewire or ProTools interface card that is supplied by Apogee, and then you insert in the unit to configure it how you want it. We have a Rosetta 800 running as part of our setup with ProTools HD and it works flawlessly!
    _________________
    -Mark
    5am Studios, an
    Austin Recording Studio
    We Support The Austin Music Scene!
     

Share This Page