1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

Tube-Tech CL 2A

Discussion in 'Dual Compressors' started by audiokid, Oct 24, 2011.

  1. audiokid

    audiokid Staff

    ATTACH1291.vBATTACH

    The BTUBE-TECH CL 2A Dual CompressorB features two independent optical compressors. The optical gain reduction element is placed after the input transformer and then followed by an all tube-based output amplifier with a +10 dB gain. A switch with three positions (Link 1, Off, Link 2) is used whenever you want to use the two separate compressors in stereo mode or link several compressors together. The two link buses are identical.

    Both Input and Output are balanced and have fully floating transformers with a static screen. The power supply and the sidechain circuit is based on a solid state circuit. With the exception of the anode voltage for the output stage all DC voltages are stabilized.
    h=3Tube-Tech CL 2A's featureshTABLE
    TR
    TD="width: 100%"
    LIST
    *Optical gain reduction element
    *Linkable for stereo applications
    *Dual VU-meters showing output or compression
    *Variable attack and release with a 1,5:1 to 10:1
    *Output Gain (off to +10 dB)
    *Frequency response @ -3 dB: 5 Hz to 60 kHz
    *Low noise:
    LIST
    TD
    TR
    TABLE
     

    Attached Files:

Share This Page