1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

Tube-Tech SMC 2B

Discussion in 'Dual Compressors' started by audiokid, Oct 25, 2011.

  1. audiokid

    audiokid Staff


    The BTUBE-TECH SMC 2BB Stereo Multiband Compressor is an all tube-based compressor that adds the warmth of vintage quality masters to your mix.

    Variable crossover points ensure precise control with all three bands of opto-compression. Independent band specific Threshold, Ratio, Attack, Release & Gain parameters make the SMC 2B as flexible as it is accurate.

    The TUBE-TECH SMC 2B Stereo Multiband Compressor features three independent optical stereo compressors. The signal is divided into three bands (Low, Mid & High) by 6 dBoctave x-over networks with variable frequencies: 60-1200 Hz for LowMid band and 1,2-6 kHz for the MidHigh band.

    The design of the x-over networks optimizes the summing of all three bands, resulting in a flat frequency response (within +-0,25 dB), when the gain controls for each band are set at the same level. The three compressors feature Threshold, Ratio, Attack, Release and Gain and a display showing gain reduction. Master levels are set with Output Gain and Balance controls.

    Both Input and Output are balanced and have fully floating transformers with a static screen. The power supply and the sidechain circuit is based on a solid state circuit. With the exception of the output stage all DC voltages are stabilised.

    BTube-Tech SMC 2B's featuresB

    *The world's only ?all tube based? multiband compressor design
    *Three bands per channel with variable crossover frequencies between bands
    *Stereo sidechain with variable Threshold, Ratio, Attack, Release and Gain controls for all three bands
    *Master Output Gain (off to +10 dB)
    *Balance Control (+-1,5 dB)
    *LED display showing compression
    *Freq. response @ -3 dB: 5 Hz to 60 kHz
    *Low noise:

    Attached Files:

Share This Page