1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

two quick questions?

Discussion in 'Recording' started by tempest1226, Aug 17, 2009.

  1. tempest1226

    tempest1226 Guest

    hey friends. a couple quick questions.

    1. Can and How do you run an analog mixer with a DAW such as pro tools. What would you need?

    2. With the Roland TD series drums, can you load your own wav files into the brains rather than using the loaded presets?
  2. Kev

    Kev Well-Known Member

    Nov 13, 2001
    enough I/O to recieve from the sub groups or tape sends
    enough inputs on the DAW to not need to use the DAW mixer
    or anything in between

    why use the mixer ?
    that will probably go far to answer your question

    gut feeling is no
    the TD units are not sample players
    so you with have to use midi and send to a sample player ... soft or hard
    this would loose some of the HiHat and double sensor magic
  3. 1. Well pro tools is proprietary to either digidesign or m-audio interfaces. you cant use it with anything else. In theory I guess You could plug the analog mixer into a line input in the interface.

    2. No. I just sold my Roland kit. You cant upload .wav

Share This Page