1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

UA LA-610 Tubes

Discussion in 'Pro Audio Equipment' started by eightsonstudio, Nov 13, 2005.

  1. has anyone on this board ever re-tubed a 610 pre amp? and would selecting a differnt brand of tube help clean up the muddiness of this pre amp at all?
     
  2. i guess this a dead one 8)
     
  3. MilesAway

    MilesAway Guest

    can't hurt... preamp tubes are dirt-cheap and you can swap 'em yourself. Depending on the age/condition and type of the tube you're running right now, it may make a huge difference or none-at-all. Only one way to find out...
     
  4. true that, the unit s less thatn 2 months old
     
  5. jonyoung

    jonyoung Well-Known Member

    Check these guys out:

    http://

    I recently got some Mullard 12AT7's from them. Very good prices and quick turnaround. I put some NOS Raytheons and Westinghouse tubes in some other channels (ART Pro MPA's). The sonic quality improvement was very noticeable. Go for it!
     
  6. thanks aot, i have 2 tps also i wnat to change the tubes in
     

Share This Page