1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

Understanding Hz and kHz

Discussion in 'Recording' started by MediaMurder, Sep 8, 2007.

  1. MediaMurder

    MediaMurder Guest

    Does anyone know a good resource for this type of thing? When someone says roll off 3db at 150hz or what ever I would like to know what that means, lol...
    Thanks guys
     
  2. thats mainly in eq'ing if you pull up a 5band eq then you'll see the different freq's an you can roll of "cut" highs, lows, an mids... look up s#it on eq you'll see what i mean
     
  3. A bit obvious, maybe, but have you tried the internet?
     
  4. MediaMurder

    MediaMurder Guest

    yeah, nevermind...
    I found some cool resources.
    Thanks guys..
     
  5. TVPostSound

    TVPostSound Guest

    http://www.amazon.com/dp/0240806255/?tag=recording.org-20
     
  6. Link555

    Link555 Well-Known Member

    3dB is the half power point
    http://en.wikipedia.org/wiki/Half_power_point.

    Look up bode plots too:
    http://en.wikipedia.org/wiki/Bode_plot

    So much to learn.... so little time.
     

Share This Page