1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.


Discussion in 'Recording' started by bmfslayer, Oct 3, 2007.

  1. bmfslayer

    bmfslayer Guest

    I am wanting to upgrade my my 24.8 mixer. i do allot of live recording and mixing in the studio, i record to a HD24 and 2" 24 track tape.I also have various out board gear such as distressor, compressors and effects. I have a separate control room. and a budget of about 4-6 thousand. any suggestions
  2. Link555

    Link555 Well-Known Member

    what do you currently have, and what do you need it terms of functionality?
  3. bmfslayer

    bmfslayer Guest

    i currently have a mackie 24.8
  4. Link555

    Link555 Well-Known Member

    and what functions do you want in the new console?
  5. bmfslayer

    bmfslayer Guest

    something along the lines of the TRIDENT SERIES 8T, i recorded on this mixer just two weeks ago an LOVED it.
  6. Link555

    Link555 Well-Known Member

    ok so just str8 analog then....

    Toft makes the ATB
    Trident 8T is out there too.


    Its funny the whole Oram versus Toft thing.

    They both developed the Trident series 80 board, which was kind of like the original low budget board back in the 70's. But now they are fighting it out, basically selling the same product.

    All I know is I had the chance to try out a Oram 4t strip which has the same pre's as the trident 8T. It was nice, but a little too colored for my taste. Inside the build quality was terrible, it looked like a prototype. I personally will not buy a Trident product because of it. It just says to me the quality is not important to Oram.

    I don’t know much about Toft, although I have heard good things. If you like the Joe meek stuff (which Toft designs) you may like the ATB.

    Worth Checking out.

Share This Page