1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.


Discussion in 'Recording' started by geeknik, Sep 11, 2005.

  1. geeknik

    geeknik Guest


    I am recording a band right now. We just had a crash on my PC. I am running Sonar 4 producer edition and when trying to add chorus onto a guitar it crashed and rebooted my PC. Now after it loaded back up I can't see the waveforms on half the tracks but I can hear them fine so the data is there!

    Anyone know how to fix this?
  2. Grooveteer

    Grooveteer Guest


    Delete all .wov files. Sonar will rebuild the wave forms.

    Should do the trick.

    Good luck.
  3. CoyoteTrax

    CoyoteTrax Well-Known Member

    May 25, 2005
    Home Page:
    Also check your hardware acceleration for graphics in Windows.

    Acceleration may have reset itself, so bump it back up to 75% or 100% if it reset back to a lower default setting.
  4. geeknik

    geeknik Guest

    Thanks brother! You saved me!

Share This Page