1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

What amp would work with these monitors?

Discussion in 'Monitoring & Headphones' started by edaub1, May 20, 2010.

  1. edaub1

    edaub1 Active Member

    Jun 10, 2009
    For the past 6 years ive mixed used just a stereo systems speakers :( Though with DECENT results ...

    I ust bought a par of KRK ST6's... I really need to buy an amp. Unfortunatly, i want to stay below $300..
    I know there cheap speakers...Is it worth spending a ton on a amp?

    Here are the specs:

    Drivers: HF 1" Silk Dome Tweeter, LF 6.5" DLDA Aluminum Woofer
    Frequency Response: 62Hz-20kHz ±2dB
    Sensitivity 1W @ 1m: 89dB
    Maximum SPL @ 1m: 107dB
    Nominal Impedance: 8 Ohms
    Maximum Power Handling: 100 Watts
    Dimensions: 13"H x 8-3/4"W x 9-3/4"D (33 cm H x 22 cm W x 24.5 cm D)
    Shipping Weight: 21 lbs. (10 Kg)

    Any suggestions?
  2. RemyRAD

    RemyRAD Guest

    Sep 26, 2005
    Since you've included no budget other than cheap, my suggestion is a Crown D 75. I love the sound of Crown amplifiers. But then most any direct coupled output amplifier of a class AB D or G would be fine. You certainly can't afford a Macintosh amplifier. BGW and Peavy would be adequate.

    How about a Delco car radio amplifier? he he
    Mx. Remy Ann David

Share This Page