1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

What mic preamp is good for RE-20 for VO work?

Discussion in 'Preamps / Channel Strips' started by layccor, Apr 20, 2007.

  1. layccor

    layccor Guest

    What type of preamp should I be looking for for RE20 when doing VO for radio. I am looking for something that is going to get me the best out of the mic for a relatively decent type of price.

    I mean I am not looking to go super elaborate here, just something to bring the best out of the mic.

    Any suggestions would be great, thank you.
     
  2. AudioGaff

    AudioGaff Well-Known Member

    There are just to many that fit that criteria to mention. I have never had a problem using the RE-20 with any high end professional external outboard mic preamp. When I do VO sessions, I usually start with my Focusrite Red-7, which happens to be a long time industry standard for VO work, and I rarely need to try anything else.
     
  3. bwmac

    bwmac Active Member

    Focusrite Red-7

    Wow that Focusrite Red-7 is a sweet looking rig, At least to a low end new-be like me.
    Now I have to ask one of those questions;
    How many I/O does it have, I mean does a single mic
    plug direct to the red 7 and then out to the board.
    I only have a small home studio and am just trying to learn
    for the future. I have a whole two Phantom power supplies, LOL
    and is it the same as a mic pre amp.
    Now I'm dumb.
     
  4. AudioGaff

    AudioGaff Well-Known Member

    Yes, the Red-7 is a single channel unit with one output that has separate mic input and a line level input. Line level outputs such as those on external outboard mic preamps connect to line level inputs on audio gear such as a mixer.
     

Share This Page