1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

What to Master with???

Discussion in 'Recording' started by essex, Jan 21, 2003.

  1. essex

    essex Guest

    Greetings, I thought I would throw this out and see who responds.

    I am currently tracking with Nuendo on a PC p-4 using the Midiman delta series interfaces(4).

    I have not as of yet used Nuendo for any mastering. I switched to Nuendo after being a Pro-tools user for many years. Has anyone used Nuendo in this capcity? I have Sound Forge which I use so far to boost and normalize/edit in past projects and have mastered quite a bit with Pro-tools. Which route should I go? I feel like I should stay in Nuendo simply because of the ease of no export, as the project is fairly track heavy.

    Thanx for any responses.

    D.Mouatt
    Studio Land
     
  2. audiowkstation

    audiowkstation Active Member

    Soundforge, Cool edit Pro are great 2 track mastering devices, you just have to learn all the math and the ropes.

    Sonic soultions, sadie, and going to analog through the board, all of them and combinations of each work fine. Hell I used t-racks on a vocal track when nothing else would do.

    Pull out the bag of dirty tricks, that is what mastering is all about. No limits really. What can work for you at a given time. Learn it all.
     
  3. robchittum

    robchittum Guest

    Bill,
    I know that this will be too general of a question, but I'll throw it out there anyway. What are the main things that you almost always do in the process of mastering? I know that a lot of individualized tricks are used for fixing various problems, but when you get a CD that is pretty consistent across tracks and pretty well recorded (assumptions). For example, do you almost always eq (any patterns to the type of eq curve you apply), normalize, maximize, ... Just wondering if there are a few "givens" that you almost always use before you do more specific treatments. Thanks,

    Rob
     
  4. 3dchris

    3dchris Active Member

    I would like to add a question here: what is the best format to mix to? Should I mix to a dat tape or CD? If CD then is the internal CD burner as good as external one? Please advise.

    P.S. I am using RME ADI-8DS interface.


    tnx,

    chris
     
  5. themidiroom

    themidiroom Active Member

    I'd like to know this as well. I have been recording at 44.1k 24 bit.
    P.S. Bill if you suggest we mix to 1/2" analog tape, I'm going to hunt you down. ha ha :d:


    themidiroom
     

Share This Page