1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

Where do i go

Discussion in 'Recording' started by godtruth, Jun 23, 2009.

  1. godtruth

    godtruth Active Member

    I'm using logic pro 8 and i have a yamaha n8 and i would like to have the soft ware respond through the mixer (n8). The logic im still trying to understand so will you give me a step by step on this project thank you
     
  2. NCdan

    NCdan Guest

    Steinberg.
     
  3. natural

    natural Active Member

    Let google be your guide. Type in: "Yamaha N8" and logic
    You should get plenty of info.
    and it looks like NCdan is in the ballpark.
     
  4. ouzo77

    ouzo77 Active Member

    ?!?
     
  5. ouzo77

    ouzo77 Active Member

    ok, i see what you mean by "steinberg"...

    but he does have logic, so maybe i can help.

    i don't have the software in front of me at the moment, and mine is in german, so the terms might differ a bit.

    go to preferences -> audio -> devices -> core audio
    there's a drop down labeled "devices". there you must select the yamaha n8 driver.

    btw, here's a picture of the panel i've just found:
    http://km.support.apple.com/library/APPLE/APPLECARE_ALLGEOS/TS2462/TS2462-01.jpg
     
  6. godtruth

    godtruth Active Member

    Ouzo77 thanks for that preferences will you share more base on your knowledge it will help however i will try this to see i will return thank you
     
  7. godtruth

    godtruth Active Member

    Now i did try that and im still trying to send the logic mixers in the yamaha n8. the n8 i have it being receive from logic however now i need the output of logic to go back in the n8 so that they can respond together because right now when i do vocals it's not being control by the n8 so thats is where im stuck at so another step by step will help so that i can move on thank you
     
  8. ouzo77

    ouzo77 Active Member

    so you receive a signal from the n8 but can't get a signal back to it.
    normally when the device is set in the preferences pane, it should act as an input and output.

    have you set the outputs of your tracks to the outputs of the n8? you can do that with the buttons above the faders in the logic mixer. it's usually set to output 1-2, which is the main output of the audio interface. but you should be able to select other outputs like "output 3-4" or "output 5-6". i'm not sure though how it works with the yamaha. the manual of both (yamaha and logic) should help you. or a google search.

    btw, some punctuation in your posts might make them more understandable.
     
  9. godtruth

    godtruth Active Member

    thank you for being concern and i would take your advice and yes it does have output i just dont know how to patch it beause the language is different from cubase and im new at logic so its a mind boggiling thing for me however thanks
     

Share This Page