which dither to use L2 or sonic solutions?

Discussion in 'Mastering' started by jasonlivermore, Feb 8, 2002.

  1. I recently purchased the L2 to use in conjunction with my finalizer plus and sonic solutions.
    Before i got the L2 i would always dither 24 bit sources to 16 with sonic solutions, but the L2 says it's dither will make the 16 bit sound more like 19.
    So should I dither with the L2 and load the sound files in at 16, or load them in at 24 and dither with the sonic. Most of my stuff is hard rock , if this helps.

    jason livermore
    the blasting room
    ft. collins, co :)
     
  2. brad

    brad Guest

    ....
     
  3. Hey Jason,

    Did you guys expand at all after Shaped Music moved out from next door?

    regards,
    Greg Heimbecker
    University of Northern Colorado
     
  4. joe lambert

    joe lambert Distinguished Member

    We have run some extensive listening tests with the different types of dither you mentioned as well as a few others. We found from our tests the SBM2 which is available in Sonic Solutions sounded the best. It was a noticable difference.

    I also recommend you go into your workstation at 24bit then do your dither on the output. The only time I will load anything at 16bit is if its a soundfile straight off a mastered CD and I'm just going to re sequence, edit.. and then create a new master.

    Joe Lambert
     
  5. greg,
    we have stayed the same size, but are thinking about building a new studio sometime in the future. By the way i would like to come check out your place sometime.

    Brad,
    Thanks for the help, and tell Hampton hi from the guys at the blasting room, he help us set the place up originally.
     
  6. brad

    brad Guest

    ....
     

Share This Page