Who makes this multi-channel insert/DI summing box?

Discussion in 'Summing Mixers' started by Clueless, Apr 4, 2004.

  1. Clueless

    Clueless Guest

    I would be in seventh heaven if I could procure a rack unit which had the following specs (on each channel):

    Insert input: typical unbalanced insert cable (TRS, Tip = Send, Return = Ring)

    Output 1: Balanced or unbalanced channel send
    Output 2: Balanced or unbalanced sum output
    Input 1: Balanced or unbalanced channel return
    Input 2: Balanced or unbalanced 2nd signal (such as group, aux, or main output from another mixer). If no cable is inserted, defaults to the send signal.

    In addition to converting the typical unbalanced send/return from a typical mixer to a balanced send/return, it would support summing a second signal, on a channel-by-channel basis, either with the send (so that two console groups can be mixed before sending to EFX) or with the return, to support blending of wet/dry signals within the group structure.

    Does anybody make such a box? I would love to get a 16-channel version of such a beast fitting a 1U box. This would enable me to link 8 groups, a stereo bus, a solo bus, and link 4 aux sends between two 8-bus consoles. Cool? You bet!

    ;)
     
  2. AudioGaff

    AudioGaff Well-Known Member

    My Mackie 1202VLZ does all that and it is rack mountable. The kind of features your asking for only exists in a mixer as far I know of or have ever seen.
     
  3. Clueless

    Clueless Guest

    I counted all the balanced outs on my 1202 VLZ, and there aren't enough. There are (barely) enough summable balanced outs on my 1604 VLZ (6 aux, 4 group, 2 main = 12), but not a full 16. What I guess I'd like to see is not a 32x4 or 16x2 mixer, but 16 2x1 mixers in a 1U. Maybe I need to post this to TechTalk and see if anybody wants to make it a project (for which I'd pay).
     

Share This Page