1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

why is Sonar 4 is recording EVERYTHING?

Discussion in 'Sonar' started by Hotep, Jan 20, 2007.

  1. Hotep

    Hotep Guest

    Hey, I am new here, and relatively new to recording digital audio. My question is probably pretty simple... I hope.

    What am I doing wrong here: why is sonar 4 recording the metronome and all previously recorded (midi and/or audio) tracks on the armed track that I'm recording on? Does this have something to do with where the signal from the other tracks are sent, or do you think this is a soundcard issue?

    I'm working on an Inspirn E1505 laptop, MS windows XP media center edition, with a Sigma Tel high definition audio codec [] sound card.
  2. Ballz

    Ballz Guest

    It sounds like the input of the track you're recording on to is being fed from the master output. Check your input settings so the track knows where it is supposed to record a signal from.
  3. Scoobie

    Scoobie Active Member

    Sep 6, 2006
    I'm sure this has nothing to do with Sonar. But it is just operator error.

    You should aleast get yourself a real sound card(interface) if your going to use a audio program like Sonar or the like.

    Check your sound recording settings and trun off, What you hear............I bet that's it.

  4. jonyoung

    jonyoung Well-Known Member

    Dec 31, 2003
    Do you possibly have Sonar in "Sound on Sound" mode instead of "Overwrite? Look in the top right corner just above the clips in Track View.

Share This Page