1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

Will this setup work?

Discussion in 'Recording' started by xX5thQuarterXx, Apr 6, 2006.

  1. xX5thQuarterXx

    xX5thQuarterXx Active Member

    Hey so i am makin a home recording studio. Its gonna be recorded onto a Mac G5 threw a Firewire or USB mixer. But since i need 8 XLR inputs on my mixer i had a question. I already have a powedmixer that i can plug my drum mics into. Can i take a 1/4 Main Output from the powered mixer and instead buy like a 8 channel mixer? or will the signal come in to hot?
     
  2. gilligan204

    gilligan204 Guest

    What type of main out put is this ? If its for speakers it wont work, it will be too hot, what you need is a line level signal out of your DRUM board, into your line ins oin the USB interface, That should do the trick
     
  3. xX5thQuarterXx

    xX5thQuarterXx Active Member

    ok well on the powered mixer there are 4 speaker outs that im NOT using. There is also a Main out and a Mon out and a Effects out. Should i just use the main out straight into the USB interface or do i need a line level just to make sure?
     

Share This Page