1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

Wiring a three pickup strat with 5 position switch

Discussion in 'Accessories / Connections' started by Guitarfreak, Jun 26, 2009.

  1. Guitarfreak

    Guitarfreak Well-Known Member

    I'm doing a setup on a friend's guitar and two of his three pickups don't have any sound, the bridge is the only one that works. I opened it up and the inside looks like somebody tampered with it. They don't even look soldered. I can solder but is there a schematic that I can follow?
  2. dvdhawk

    dvdhawk Well-Known Member

    Fender is always willing to help:



    The Stewart MacDonald site not only sells the parts, but also has nearly every diagram and combination you can think of.

  3. Guitarfreak

    Guitarfreak Well-Known Member

    Just in case it matters, it's not a Fender strat, it's an old 70's knockoff strat called 'Lotus'. Would it still be wired the same though? Three singles with a 5 pos.
  4. dvdhawk

    dvdhawk Well-Known Member

    The knockoffs all used the same basic Fender wiring scheme. It should be exactly the same.

Share This Page