1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

Yamaha 01V96 Digital Mixing Desk with Pro Tools?

Discussion in 'Pro Tools' started by Misery, Sep 1, 2013.

  1. Misery

    Misery Active Member

    Mar 8, 2013
    My mate has a Yamaha 01V96 digital mixing desk he willing to let me borrow and I was wondering if I could use it with Pro Tools to use as either a controller or to actually record?

  2. kmetal

    kmetal Kyle P. Gushue Resource Member

    Jul 21, 2009
    Boston, Massachusetts
    Home Page:
    it won't work as a controller, but you can use it as a front end to your protools interface. you can use the mic pres/eqs/compressors on each channel, and output each channel of the mixer to an input on the pro tools interface.
  3. Boswell

    Boswell Distinguished Moderator Resource Member

    Apr 19, 2006
    Home Page:
    Depending on the audio interface hardware that you have, you can use the 01V96 for recording via ADAT inputs (up to 24 channels) and/or up to 6 (or 8 with care) separate analog channels. The non-i versions of the 01V96 cannot input any audio to a DAW via USB.

    The 01V96 V2 can also act as a control surface for PT if you use USB MIDI as the control connection. You need to take care to implement all stages in the set up process correctly. Page 190 in the 01V96V2 manual describes how to set up the mixer, including using the Remote Layer as the control surface.

    On your PC, you have to have the Yamaha USB MIDI serices running and also run PT as administrator. To do this, right-click on the desktop PT shortcut and select "Run this program as administrator" in the Properties-> Compatibility tab.

    Because the 01V96 has 16 faders for use as controls, you will need to set up two HUI sets in PT.

Share This Page