Skip to main content
forums, blogs, song critique, support & more...

Current Topics

Studer A807 Mk 1 Software 30/88

Machine had fault were 50 V fuse kept blowing. I think that was loose reel turntable causing the Reel drive to crossbar the supply, whenever it got out of step. That sorted , but now unable to align the Audio.
Unable to get any change in adjustment parameters in Level , hf for Repro Sync and record. All speed, All eq.
BUT can control bias level.
It was storing tape position. ( Latest test, seem to indicate that no that is not happening , but unsure about the reliability of this test).
My fear is that it a faulty MCM2802. eeprom chip.

Help ISP decimator pro rack G guitar convert to stereo mod version

PCB legend

hi everyone, i have an isp decimator g pro rack guitar version, for my marshall 9200, jmp1, jfx 1 configuration i would need the stereo mod version, i tried to look for used ones, but i couldn't find any. Opening the frame of my decimator I noticed that there is the possibility to convert it from guitar to stereo and vice versa. At the top left is indicated a legend of the position of the components that must be added or removed according to the version to be obtained, the problem that the values of the individual components are not described.

Steller Electronics

Cover Photo
Filter Test

*Steller Electronics*

Custom Electronics Design, Modifications and Repair

Located in North Vancouver, BC Canada, Steller Electronics specializing in audio electronics.  Whether you want a new design or want to improve an existing design Steller Electronics can help.

 

Critique my first attempt in professional mixing & mastering

Hi y'all, I'm fairly new in audio engineering and mixed and mastered my first full song.
I must say it was recorded very precisely, good mics, mic placement adjusted perfectly so I did not had to replace tracks or phase shift, so it was quite fun. I would love to hear your thoughts and get some critique, so I can do better next time. Plan is to offer my services soon after I have had some more expirience...

Subscribe to Current Topics
x