Skip to main content

i hear sound but dont see it in pro tools

Member for

21 years
ive got a behringer xenyx 2442 mixer
with an akg 414 on the first channel
then output to the m box and into pro tools
now i can hear whatever im saying in the head phones and monitors
but it doesnt make the meter jump in pro tools in the mix screen
so i hear it but i dont see it
what can it be??
Please much help is needed so dont be coy :evil:

Comments

Member for

15 years 10 months

hueseph Thu, 11/02/2006 - 20:32
sheet wrote: Plug the mic into MBox.

Ha! That's classic. What a novel idea!

To be fair: look for a button that says "to mix" on the channel you're plugged into or something to that effect. That should send your channel to the main stereo out. (yes, I'm guessing.) Otherwise, you could probably scrap or sell the Behr. You really don't need it.

Member for

18 years 2 months

pmolsonmus Fri, 11/03/2006 - 06:25
Ok....

Then explain why you're going from the mixer's preamps to your MBox.

I won't argue that the Mbox pres are great, but they are at least Focusrite pres and clean.

Oh.... never mind, Now I know....

Features:
Premium ultra low-noise, high headroom analog mixer
10 state-of-the-art XENYX Mic Preamps comparable to stand-alone boutique preamps
Neo-classic British 3-band EQ's with semi-parametric mid band for warm and musical sound
Studio-grade 24-bit stereo FX processor with 100 awesome presets including reverb, chorus, flanger, delay, pitch shifter and various multi effects


all for $289 list....hmm--- sorry....my bad

Member for

18 years 3 months

sheet Fri, 11/03/2006 - 06:54
lol.

Sorry fella. You have to understand, messageboards should be used as a last attempt to gain insight, when you can't get what you need from a book. There are some hidden features in PT that aren't documented. Stuff like that. So, anyone that comes on here is gonna get their chops busted for not doing your homework FIRST.

This is also ANOTHER reason that you should buy a Mac and not a PC for PT, because it is going to work right out of the box. AND you should buy your system and have it installed at the most reputable dealer in your market, with the best hand-holding support.

Member for

18 years 3 months

sheet Wed, 11/01/2006 - 21:53
Come on! Watch the videos! Read the manual!

Sounds like you are monitoring the input. Assign an input to a channel in PT. Make sure it is a mono channel, not an aux or master. Put the channel in record mode. Hit record. Then watch it come to life.

Tags

x