Skip to main content

Alright, so my band is playing our first show on Friday, and I got everything setup in our PA to sound pretty good, cept theres only one last thing to do. I have a Rane ME 15B stereo EQ that i was going to use between my Mackie 1604 VLZpro and my QSC 2450, to put a lil master EQ on both the left and right channel.

Honestly though, I have no idea what to boost / cut for a emo / pop punk band.

Comments

hueseph Tue, 11/14/2006 - 18:39

Gotta agree with Nirvalica. The rule of thumb is: EQ is a tool for "fixing" things and if it ain't broke, don't fix it.

On the other hand, where a good eq will come in handy is when there is a problem particularly with feedback. If you can't fix it at the source and you're ears are in tune, you should be able to pick out the frequency that's feeding back and drop it a few notches. Sometimes you can "fix" the problem.

mark_van_j Tue, 11/14/2006 - 21:18

I have a test CD I made that has 31 frequency tones. One for each eq fader on a 31 band eq. I run it through, listen for any major peaks or dips in the sound system or room. I then use the eq to fix the foh sound to get the most balanced sound possible. Usually I don't need more than a 2dB cut or boost, on a max of 4-5 frequencies. Anything more than that I see as bad gear or bad room, and try not to exagerrate.

But this means you need at least 15 minutes behind the mixer for every show, before sound check.

That's what I use it for. I don't use it for anything other than fixing the room and PA system. Which means it doesn't really matter what type of music the band is playing.

RemyRAD Wed, 11/15/2006 - 01:05

I generally don't use a graphic EQ on a PA system if I don't have to. The equalizers on the console are considered to be "Program equalizers". Meaning they are not for corrective purposes like a graphic but for contouring the sound. Which is what you want to do. You tweak the mix so it sounds good and that's it. Don't bother hooking the thing up unless it is for feedback reduction purposes and then follow the other posters advice. Graphic equalizers are also used when you are assembling a speaker system from individual components. And with that, you'll also need a real-time spectrum analyzer and calibrated microphone. Now some people think you do that to obtain a flat response but that's incorrect. You adjust it for a "pleasing response" since flat may not be where it's at?

B cups
Ms. Remy Ann David