digitech gnx3000 guitar work station?
anyone use this as a di using protools?
Any specific reason why? I don't have this unit but with some of them speaker emulation is something you have to turn on. So if you find that you're not getting the tone you want, check to make sure that speaker emulation is active. Of course, through your amp you won't need this but direct it's essential.
well I mic my amp when i record during the day, however most of my recording time is at night and it causes an issue when your neighbor is a doctor and thinks he god. So i needed something for di. I the book for the 3000 doesnt show diagram for running into a pre amp, in this case my mbox. Excuse the noob question but what is the speaker emulation?
It's exactly what it sounds like. Speaker EMULATION. It emulates the sound of a speaker cabinet by means of algorhythms. That way when you plug into the LINE (don't be plugging into the mic input. And, into the instrument input only if your GNX is set up properly) inputs of your Mbox, it doesn't sound like you're pluggin directly through a distortion box without an amp. The emulation is what makes it sound like you did a great job micing your amp. All that being said, I can't help but think that if you're plugging into the mic input, it's distorting real bad. If you do plug into the instrument input, make sure both the Mbox and GNX are set up accordingly.
ok I get it. as far as the mbox being set up corrct, are you talking about the gain?
Well if the input on the front is a combination xlr mic input/trs instrument input, just make sure is set to receive instrument level input. That is if there is a button or switch make sure it's set for instrument.