Hey everyone.
I have an E-MU 0404 USB interface. I just recently bought a R0DE nt1-a and Planet Waves gold-plated xlr-XLR cable. I plugged it all in, turned on the phantom power from the interface, and I get very very low signal, even when I turn up the level all the way for the mic's channel.
I don't know what it could be. I do have an incredibly low signal coming into cubase, but it's unintelligible and I'm sure if I were to boost it, I would get a lot of background noise, too.
Please help me. I'm new to this, so don't assume I connect my chain correctly (although I checked it over and over again).
Thanks a lot.
Topic Tags
Comments
Okay I took your advice and plugged in my dynamic with the cable
Okay I took your advice and plugged in my dynamic with the cable I'm using, and it works perfectly. I also already tried both inputs and same exact results.
Here's the thing--when I turn on phantom power with the DYNAMIC, I still get the exact same level of input. I always thought phantom power should affect the signal when using a dynamic.
THoTprocess wrote: Okay I took your advice and plugged in my dyn
THoTprocess wrote: Okay I took your advice and plugged in my dynamic with the cable I'm using, and it works perfectly. I also already tried both inputs and same exact results.
Here's the thing--when I turn on phantom power with the DYNAMIC, I still get the exact same level of input. I always thought phantom power should affect the signal when using a dynamic.
No, the point is that, as long as it is correctly wired, there should be no difference having phantom power on or off when using a dynamic mic. In this way, you can use any combination of condenser and dynamic mics on a mixer that has only a global phantom power switch. Don't try it with ribbons, though.
Either the phantom power on your 0404 is not working correctly, or your NT1-A is faulty.
What you do is is to try basic troubleshooting. Break down the p
What you do is is to try basic troubleshooting. Break down the problem until you identify what it is the problem. Try using a different mic and/or non phantom powered dynamic mic. Try a different cable. Try the other channel of the 0404. Try using a line level source such as a guitar/bass, drum machine, keybaord, Ipod ect...
E-MU has excellent tech support. You can call them and have them walk you through it.