Skip to main content

Analog --> Digital converter for RNP ?

Greetings.

If I have some modest mics (SM-57, SM58, AT-2020) feeding an RNP preamp, what would be a comparably cost-effective way to get the signal to the computer with decent fidelity?

Thanks.

- Richard

Comments

Pro Audio Guest Wed, 09/17/2008 - 08:44
Because you already have a pre-amp, I would recommend the M-Audio Delta 1010LT. It has 2 balanced and 6 unbalanced line inputs. As long as you keep the run length short you should not have any noise problems with the unbalanced lines.

Or if the thought of unbalanced signals near your CPU bothers you, check out the Delta 66 and Delta 44.

BobRogers Wed, 09/17/2008 - 14:18
If you don't have a Mac and have not yet bought the RNP, I'd look for an interface that combines preamps and converters. There are a lot of good interfaces for the price of an RNP and an Apogee Duet (amost $1,000 total).

I guess that an RNP/Duet/Mac chain might give you two channels that would be superior to any of the converters in that range. (At least it would be interesting to try.) But there simply aren't a lot of people out there going this route.

For what it's worth, I have an RNP and like it. But it was not as different as I'd hoped from the preamps in my A&H mixer, Digi 002R, and Octopre. I now have a API 3124 and a Langevin DVC and these are a noticeable step up. If I had it all to do over again, I'd stick with the pres in my interface until I was ready to jump several price points.
x