Skip to main content

Why does my genesis sound so sh*tty? It's really quiet, and things sound very thin and wispy. I'm pretty unhappy, especially after spending about $500 on one. Any tips? Does this mic just suck? Is it a lemon? Does the tube need more time? Any advice would be awesome.

:confused:

Topic Tags

Comments

kmetal Sun, 09/30/2012 - 14:32

well i have heard that tube mics take about 15min. to warm up. My first question is are you using phantom power? what mic pre are you plugging into? Did it sound that bad at the store, or did you mail-order.? I mean, i wouldn't expect it to sound like a c-12, and there are certainly a ton of mics i would buy first before a $500 Chinese condenser, but that is another topic. What are your intending to record? Is your gain staging correct? it's possible you have your outputs cranked on your interface (if your using one), and your input, very very low. hence output-boosting a really quiet, thin, sound. it'll be tough to do much more than speculate, until i/we know more detail about the situation.

TheVetrinarian Sun, 09/30/2012 - 15:03

I am not using phantom power. Should I be? It has its own PSU. I ordered it from eBay, but the videos (fan made and MXL made) of it in action sound nothing like the thing I have. I'm using it as an overhead drum mic, vocal mic, and guitar mic, but all sound bad in the same way (thin and wispy). I'm not a super mic snob or anything, I have a Blue Bluebird that sounds better, as well as some SM58s, so I don't think I'd say I'm being picky; I think it objectively sounds just bad. The gain on it's mic-pre (profire 2626) is almost dimed out. Hopefully I've answered all your questions and this is enough info. I can also send some samples of recordings if that helps anyone.

TheJackAttack Sun, 09/30/2012 - 18:57

You should have way more gain than your description allows. This is a side address microphone and not and end address microphone. Are you sure you have the correct orientation towards the sound source? If so, then you need to try a different XLR mic input on your "board"-try it in the bluebird input and see if things are the same for instance. If not this then you may have a bad tube. The Genesis is definitely not a C12 and will be a bit crispy for a tube mic but it should provide plenty of level.

hueseph Sun, 09/30/2012 - 21:02

I'm surprised it sounded that bad. I have to ask again. Are you using it correctly? This is a SIDE ADDRESS mic. That is, the mic should be upright when you sing into it. I have a low end CAD tube condenser that sounds great for the price. It ain't no U47 but it's pretty decent. See if you can get a new one and try that out. Otherwise, Rode makes some great mics. NTK, NT1.

kmetal Mon, 10/01/2012 - 22:27

the genesis got good reveiws in the situations you want to use it, maybe you just got a bum tube due to lack of quality control, consider maybe an exchange? i dunno. The word "tube" is a novelty i think unless your rolling w/ the big dogs, like the mics i can't afford, and drool over. i'm no fan of the mxl's i've tried, they can flaunt 'tube' or 'mogami edition' all they want, they sounded not good.

I haven't used it, and i've heard yay's and nay's about it, but the avantone cv-12 is in your price range. i wouldn't hold my hopes to high personally, but it was used on one song on a taylor swift cd. but i bet it had to do w/ her performance being un-repeatable, and the mic just 'not getting in the way', rather than OMG her vocal tone sounds amazing thru that mic, we have to use that. if that were the case, they woulda used the $500 Chinese clone on the whole cd.

why not just get a mic that's more 'tried and true' in that price range? Are tubes necessary? an sm7 or sennheisser 441 (used), would be just fine for those applications, and probably smoke a mid priced condenser most of the time. If your dead set on a condenser how bout saving a couple and getting a used Neumannn tlm 103? akg 214? geez i'd take a Rhode nt2 over any mxl i've ever heard.

Just the fact that you bought a potentially defective 'brand new' mic turns me away. also it re-enforces try it- buy-it. everytime i've purchased gear w/ out using it, i've been let down, big time.

the blue mic is nice. why do you want another mid-price condenser? what about a pre-amp upgrade? just brainstorming.

pan60 Tue, 10/02/2012 - 10:14

I have tried a few MXL mics and just did not really care for them, but I think they could be a usable mic.
A friend of mine uses some of the MXL mics and although he is not talking about them on the forums he really likes them. Based on that I would think maybe you just got a bum mic? Maybe get it swapped out if you feel you really need one?

I like BLUE mics, but I would say rather then another mid priced mic, save a few more dollars and grab an over better mic?

If I only had $00.00 to spend I would one set on it ( if I did not need a mic ASAP ), or I would get one or two nice dynamic mics.

RemyRAD Wed, 10/03/2012 - 00:37

Everybody thinks that tubes give you a mellow sound. Well they can and they can also not. Many of these newer Chinese made condenser microphones feature very thin diaphragms. Generally on the order of 3 mil with some even as thin as 1.5 mill. Older condenser microphones like many of the Newmann's have diaphragms as thick as 6 mil. Everybody in recent years keeps thinking that the more high frequencies that you hear, the crispier that the mic is, the better it must be. Au contraire. It just gives you a very crispy and brittle metallic microphone sound. So it doesn't matter if it has a tube. It's a crappy thin diaphragm.

You might want to look into is one of those active, phantom powered and buffered ribbon microphones? You get that big round of warm fat sound along with extremely accurate sounding transients. Noise is extremely negligible on these active buffered ribbon microphones. And they don't sound like any dynamic or condenser microphones. That's why a lot of recordings still utilize SHURE SM-7's. Even when ya get tight on them, you are still in the proper distance from the capsule. And they don't have a really bright and crispy sound. Quite warm actually. Even warmer when you turn off the presence rise switch. Condenser microphones don't always equal better microphones. It's called utilizing the right tool for the job. You don't use a hammer when you need a pair of pliers. Follow? You are trying to hammer out the sound of the condenser microphone to be something other than a condenser microphone. Tubes really only provide the warmth when you begin to overdrive them. That's when they start to go nonlinear and produce even order distortion along with very soft and not flat topped overloads. Otherwise they sound as clean as the transistor. And then you're not getting what you want from them. It's a false sense that the tube will make your sound right. So yeah, return the critter.

Just because it's not rich and excessive high-frequency content does not mean it's bad.
Mx. Remy Ann David