Skip to main content

Hi,

I'm making trance/dance music with Reason 2.01, Cubase SX and my hardware gear. I have some questions whats the best db level to record -6db? I see on some tutorials always from -6db but my soundcard has also +4db. I'm beginner and don't understand all the different things. Like when you have to eq channels, ... Anyone can give me some info?

Best Regards
Kris

Topic Tags

Comments

KurtFoster Mon, 11/25/2002 - 09:18

Wizzard,
The -10 / +4 settings on your sound card refers to the output level, + 4 dB being louder than - 10 dB. Which one you use has to do with what you're plugging the output of your soundcard into. Home stereo amps and audio gear is often times - 10 dB or even - 20 dB. Professional power amps and most prosumer mixers accommodate + 4 dB levels. A good rule of thumb is, if it has rca connectors its - 10 dB and if it has 1/4" or XLR connectors it's + 4 dB.
Recording levels are a different thing. When recording on a DAW it is important to leave enough headroom (room on the meter) to allow for any processing your planning on. If you add eq or compression many times it will add level to the signal. This is especially true if you are boosting rather than cutting regions of eq. It would be safe to record at levels of -10dB to -6dB on your digital meters. This should allow enough headroom for any additional processing. .......... Fats

KurtFoster Mon, 11/25/2002 - 10:59

Don,
Good point. I find it interesting that at Abbey Road, EMI would have the engineers work in the mastering room before they would allow them to become what was termed a "Balance Engineer" i.e.; working the desk in recording sessions. This was to ensure that the engineer would have an understanding of what was required to make a good sounding master transfer to vinyl. I wonder if this was a common practice with American labels too? Now days of course it seems to work the other way with mastering engineers rising from the ranks of recording engineers. ....... Fats

Alécio Costa Thu, 11/28/2002 - 05:34

Concerning PT MIX, I have to say that when you record too hot, using over 24 tracks, things start to sound very strange, even with no plugins or gain changes. I have noticed that recording at -6db is a good practice.

If you change your mind later, for example, adding Waves Q4/Q10 or C1, things will be much sweeter.

We always have to take care of RMS level.

KurtFoster Thu, 11/28/2002 - 11:09

ACB,
Alo! It sounds as if your computer is running out of horsepower at mix. Have you ever checked you CPU and disk usage meter? If your running at over 60% on the CPU your going to start hearing what I like to call "crunchies"... this is hard to trace down because the second you solo something you CPU usage drops! If this isn't the case perhaps what your hearing is the dreaded 2-bus problem that we have been hearing so much about recently on Forum. I suspect that Pro Tools 24 floating point processing may be a culprit in this scenario. ........ Fats