Skip to main content

Hello all. I have a project to master.It is a live 2 track of a (don't laugh)Christmas Show.(Recored with 2 Scheops into a dat,near the stage.The problem being--mics were too close to the band,and the pa was flown 20 feet above the stage.Vocals are not up front,as they should be.These a very good adult singers.Any tips for bringing the vocals more up front? Thanks--This is a great forum--I read it everyday! Peace,Barefoot

Topic Tags

Comments

anonymous Fri, 10/17/2003 - 15:21

Hello Barefoot,
Perhaps you've tried this already but if the vocals originate from the center of the image you might get a little more control by converting to Mid-Side and raising the center (Mid) a bit. Many devices have an M-S option (Waves S1 Imager plugin can convert to-from M-S). This is a bit of a long shot because it sounds like this is an ambient recording and the imaging will not be nearly as defined as a studio-mixed project but try it...

Be careful - a little might help - a little more might ruin it. Aside from distortions of the balance and perspective you must be very careful of introducing phase issues.

Good Luck,
Silas

anonymous Thu, 11/20/2003 - 01:07

daw daw daw daw man I love daw and my scope meter......man i love my computer.....use a program or plugin that shows you a frequency graph and use your mouse and move it alll around like your playing a video game and listen to where the vocals originate from spike it take out what you want with a restoreer plugin....make sure you use as less as possible....I use cubase and soundforge and waves editor and stienberg mixing boardplugins....after you do all that make two tracks of each track find the track with mostly instruments and one with mostly vocals....tweak and isolate the vocals on one of your vocal tracks and tweek and isolate the music on one of your instrument tracks and then lay them down on the originals and put them togather finding the right amount of volume and mix.........thats what i would do......or.......try to recreate the production music with a synth and other instruments I play and cover it all up with a little coloration......ooops did I say that...you damb right