I have a Fender Stage 100h and a Crate GX412S cabinet and I'm interested in modifying the cab to be a 2x12. I want to do this to eliminate some excessive low-end Hz from the cab and possibly create a new 2x12 or a set of nearfields. Crate doesn't have any info on the drivers but I know they are 16 ohms each.
I also want to record my amp from the line out to my MOTU 1224.
What would the proper wiring set-up be to match the 8 ohm load from the amp? (Parallel or Parallel/Series)
Is it safe to run a solid-state amp without a speaker connected and if so would a balanced +3 line out from the amp be a strong enough signal to get into a MOTU 1224 interface which is rated +4? Does the amp act as a "pre-amp" before the interface?
Do you know where I can find in-depth technical specs for speakers made by SLM Electronics for Crate cabinets? (I've tried a search engine but no dice)
Thanks for your time and I hope you can help me. :)
Topic Tags
Comments
Run out of the guitar amp to first speaker + & -, run in paraell
Run out of the guitar amp to first speaker + & -, run in paraell to 2nd speaker + & -. The cool thing to do with a 4 /12 cab is make it stereo....I never run any amp without a speaker connected but the +3 output should work fine for your motu input. You best bet for Crate info would be someone who sells them......Fats
___________________________________________________________________________________
"The extension of the frequency range beyond audibility is beneficial to sound quality and produces brain electrical activity from the area associated with pleasure. The absence of frequencies above 20 kHz result in subliminal frustration and restlessness."