Skip to main content

I purchased a pair of m-audio studiophile BX5 monitors and hooked them up to my m-audio 410 firewire audio interface. The problem is that I'm only getting sound out of one of the monitors. The TRS inputs are running from the monitors to the analog 1 and 2 inputs. Apparently the analog 1 input is doing its job, but no luck with the second. I tried plugging the TRS cables into the line inputs, but had no luck with that. Can anyone advise me as to what I have to do to get sound out of both monitors?

Thanks,

Scott

Topic Tags

Comments

drumrob Tue, 01/04/2005 - 14:30

<>

I assume here you meant that you are routing the analog 1 and 2 OUTPUTS to the speakers? Just making sure...

Otherwise, I know the Firewire 410 has a software mixer to control it. Have you checked that mixer control panel to make sure that signal is being routed to both outputs 1 and 2? Also that you don't have them both panned left? Beyond, that I agree that checking one component at a time is the way to narrow down your problem.

Good Luck!

Rob