reverb

Not all of us have a big drum room but still wants to record real drums. This little tip will help simulate a room mic being far away in a big room... It works if you record with 1 or 2 room mic. Let me know how it works for you when you test it or if it's already this way that you do it !

Hello! I'm looking for a Delay way of Vocal by GreenDay's Give Me Novacaine (American Idiot). The Sound place is from 0:19 to 0:34 since the song started. How do you make Vocal`s sound like megaphone? I am using a translator for Japanese. I am sorry for my poor English. Thank you for your help.

Hello. I'm looking for a Delay way of Vocal by GreenDay's Give Me Novacaine (American Idiot). The Sound place is from 0:19 to 0:34 since the song started. How do you make Vocal`s sound like megaphone? I am using a translator for Japanese. I am sorry for my poor English. Thank you for your help.

this is a pretty cool video, even if it is a promo. glad people are gonna be informed about this great technique! i hope they end up trying the technique, and not just going the pluggin route only.

Hi gang :) I found a very cool interview with Bob Olhsson on YouTube, where he talks about ALL kinds of interesting things. Things like EMT Plate Reverb, Chamber, (both of which at the time were known as "echo", not "reverb"!) He also talks about things like the acoustics of the room; before...

Is it possible to create a commercial-quality mix on headphones? What to look out for when mixing on headphones? How to turn a good pair of headphones into a great one? Backed by years of experience in over 25,000 recording studios as well as thousands of headphone measurements in Sonarworks...

I discovered an issue with my ZED and contacted tech support, here's how it went: Let's say I have a backing track and a guitar. One channel is panned full left and the other full right. So while the guitarist is playing a solo intro on his channel, I'm noticing this odd bleed-like echo...

(y) Rich Chycki, a master mixer for the likes of Rush, Dream Theater, Aerosmith and more, takes us for a tour of a real progressive rock mix with a special emphasis on emulating the iconic and organic sounds of classic analog consoles in the box. Mixing Masterclass: Analog Sounds in the Box...

I have a permanent quandary over placement of a master level reverb. My live side wants to put it last, as after all, you don't actually control the reverb of a real environment. So, I am curious, do you all put it after a limiter/maximiser or before?. Cheers, Tony

Seventh Heaven LiquidSonics’ Seventh Heaven is dedicated to the reproduction of thirty of the best reverbs from the legendary Bricasti M7 in an incredibly easy to use and extremely powerful native reverb plug-in. Every preset has been meticulously sampled to provide unparalleled flexibility true...

Hi guys, Many of you know I like fabfilter alot and I can't remember a mix on which I didn't use them since I discovered their products. Now they've done it again with Pro R . A complete reverb solution, very light and great sounding. Their frequency dependent decay EQ is just mind blowing !!

Hello All, I am starting to mix a new track i recorded and want some advice on how to mix and handle FX returns and routing. I was wondering how to pan FX returns like reverb & delay. I read somewhere that in case of reverb, the wet signal should be panned to the same position as the dry...

Reverberation, in psychoacoustics and acoustics, is the persistence of sound after a sound is produced. A reverberation, or reverb, is created when a sound or signal is reflected causing a large number of reflections to build up and then decay as the sound is absorbed by the surfaces of objects...

A plate reverb system uses an electromechanical transducer, similar to the driver in a loudspeaker, to create vibrations in a large plate of sheet metal. The plate’s motion is picked up by one or more contact microphones whose output is an audio signal which may be added to the original "dry"...

A spring reverb system uses a transducer at one end of a spring and a pickup at the other, similar to those used in plate reverbs, to create and capture vibrations within a metal spring. Laurens Hammond was granted a patent on a spring-based mechanical reverberation system in 1939. Guitar...

Convolution reverb is a process used for digitally simulating reverberation. It uses the mathematical convolution operation, a pre-recorded audio sample of the impulse response of the space being modeled, and the sound to be echoed, to produce the effect. The impulse-response recording is first...

audiokid submitted a new resource: PreSonus Offers Convology Vintage Reverbs Library for Studio One - PreSonus® has released the Convology Vintage Reverbs Add-ons library for Studio One® 3, the latest i Read more about this resource...

I'm here to take your opinion about the Master :cool: this sound that only a small young man you add effects to echo the sound, Revreb and EQ:love:. this is all subject to hear the audio clip just click on the word <link removed by moderator> and you'll see if you want your project to those...

http://www.studio-one.expert/studio-one-blog//get-amazing-reverbs-in-studio-one-3-with-the-free-bricasti-impulse-responses

@audiokid @pcrecord @Boswell @dvdhawk @Davedog @kmetal @Kurt Foster ...and anyone and everyone else who is interested in the topic of Reverb and its tonal character. I 'm just curious as to how my colleagues here approach the tonal side of the reverbs we use, hoping it might spark a discussion...