Hello everyone, I need a bit of help. Im going for 2-Way Communication between my mixer a Behringer Eurodesk SX2442 FX and my Audio Interface a M-Audio ProFire 610. I've been fallowing this guide [="http://www.tweakheadz.com/how_to_hookup_a_mixer.htm"]How to Hookup a Mixer[/] under the 2 Way section and have a few questions. My mixer is a 24 Channel but only is a 4 Bus would I just run the 4 Bus Output to 4 of my audio interface inputs then run my 4 outputs to 4 channels? Also, they said direct out's will also work how would I go about doing this idk if my mixer has a d/o for every channel.