Accessing the ADAT i/o's in my OO1?

[Paladyne]

OK, I would like to be able to hook up more outboard gear to my setup. I have already made use of the analog 1/4" i/o's. What do I have to do to be able to hook up to the ADAT/digital i/o's on my 001? I am using a 733mHz quicksilver G4 as well.

Many thaks in advance,
Eric

 

[Paladyne]

http://www.zzounds.com/item--ALEAI3
^this is apparently what I have been searching high and low for! thank god I finally found a way to get to those ADAT i/o's!

 

[Doc@BeefyTreats.com]

The AI3 has been working for me. I have it slaved to the 001 by connecting it lightpipe in and out (which is how the AI3 gets driven), and have the 001 following my Lucid 24/96 AD. David

 

[Paladyne]

Originally posted by David Doc Herbert:
The AI3 has been working for me. I have it slaved to the 001 by connecting it lightpipe in and out (which is how the AI3 gets driven), and have the 001 following my Lucid 24/96 AD. David

very cool! I am all about getting the maximum use of my 001!!! thanks!